01
Glass façades
Glazing, metal, concrete and compatible façades; water quality and pressure selected for the finish.
0:00 / 0:00
HI-DRONIC / 01MAX2 · Training & field demonstration · 02:42
Commercial & industrial cleaning integration • Europe
Safer. Faster.Cleaner.
Professional exterior cleaning by drone and robot—and complete mobile systems for teams ready to do the work themselves.
01Aerial + robotic cleaning
02Custom skid, van & trailer rigs
03Commissioning, training & support
The right path for your project
What brings you here?
01 / CLIENTI need a cleaning serviceFaçades, roofs, solar arrays or industrial sites: tell us about the surface and we will study the safest suitable method.Explore services →02 / PROFESSIONALI need professional equipmentBuild your operation around MAX1, MAX2, SOLARBOT, HI-BRUSH and a cleaning station on skid, van or trailer.Explore equipment →
HI-DRONIC / 2026 catalogue
The complete ecosystem, in your language.
Fifteen pages covering our services, MAX1, MAX2, SOLARBOT, HI-BRUSH, mobile stations, technical baselines, estimator and partnership formats.
What we do / services
The outside of your site, treated with care.
From one building to a portfolio of facilities, we plan the intervention around the surface, access, water and daily operations.
02
Warehouse cladding
Industrial and logistics envelopes, with access, run-off and operations considered in advance.
03
Roofs
Targeted treatment of moss and deposits, subject to roofing material and drainage.
04
Rooftop solar
Controlled robotic brushing and purified water where module-maker guidance allows.
05
Solar farms
A maintenance method adjusted to layout, exposure, soiling and module instructions.
06
Graffiti & municipalities
Local test of treatment, heat or pressure for compatible public surfaces.
07
Industrial floors
Ground-based equipment for suitable floors, courtyards, loading and circulation areas.
08
Factories & structures
Industrial cladding, silos and hard-to-access structures after site qualification.
Illustrative AI visuals show possible before/after conditions, not completed HI-DRONIC customer projects. Results depend on the surface and the agreed method.
A realistic local benchmark, then 15% less. ↘Send us a site address and a few photos to start the assessment.
Discuss a cleaning project ↗Country-adjusted service estimator
A realistic local benchmark, then 15% less.
Choose a country, currency, surface, area, soiling and cleaning method. We model a current local-market reference and apply the HI-DRONIC target of −15% before showing an indicative range.
The address is sent to OpenStreetMap Nominatim/Overpass to locate public building geometry. After map consent, aerial imagery and a drawing tool let you refine the roof or solar area. This is a pre-measurement, not a survey.
Indicative estimate only, not a binding quote or a guarantee that the selected method is suitable. The comparison uses public country benchmarks and a consistent pricing model; it is not a promise to beat every competitor quote. VAT, travel, permits, difficult access, water supply, containment and unusual risk are excluded. Surface testing and a site assessment determine the final method and price.
Selected-country references checked 17 September 2026: Travaux.com · façade · Travaux.com · toiture · TY Drone. Currency conversion uses ECB reference rates of 16 September 2026: €1 = CZK 24.313 = PLN 4.3473. ECB.
Why HI-DRONIC
A different way to plan difficult cleaning.
Remote tools can reduce work at height and installation time on suitable sites. We compare the method with conventional access during the site study, rather than promising the same outcome everywhere.
Conventional access
- ×Scaffolding, rope access or lifts may be required
- ×Longer setup on some sites
- ×More work performed at height
- ×Work zones can interrupt operations
HI-DRONIC approach
- ✓Drone or robot where site conditions allow
- ✓Ground-controlled application
- ✓Mobile station planned around site access
- ✓Method and reporting agreed before the job
How we work
From first conversation to final report.
Listen
Your priorities, surfaces, timetable and operational constraints.
→Assess
Material, soiling, accessibility, water supply and site risks.
→Design
A tailored method, scope, equipment and commercial proposal.
→Deploy
Secure the work area, set up the mobile unit and clean to the agreed plan.
→Verify
Inspect the result and document before/after observations where agreed.
→Every step is planned, controlled and documented according to the scope of the project.
Who we are
Built in Prague. Designed for Europe's working sites.
HI-DRONIC designs and integrates professional exterior-cleaning solutions for commercial buildings, industrial sites and infrastructure. We combine field expertise, hydraulic engineering and remote-cleaning technologies to develop a safe, effective method for every surface and operating environment. From the initial assessment to commissioning, training and support, every project is managed with rigour, clarity and one accountable point of contact.
One accountable team
From the first assessment to the documented handover.
Surface first
Material, soiling, access and site operations determine the method.
Field-ready integration
Equipment, hoses, water and transport designed to work together.
Our technology
One mobile solution. The right method for every surface.
A configurable station supports purified-water rinsing, controlled soft wash, compatible high pressure and hot water, drone delivery, robotic brushing and ground tools.
Water journey
- 01Water source
- 02Prefiltration
- 03Reverse osmosis + DI when needed
- 04Optional 1,000 L reserve
- 05Selected cleaning method
Pressure & temperature
Low or high pressure chosen after testing the support; hot water up to 90°C only on compatible circuits and tools.
Surface & protection
Select water quality, chemistry and accessories for the material and soil. Check each product's safety data sheet and plan run-off management.
Water where you need it
When an on-site source is unavailable, the mobile tank can be filled at another authorised supply point.
This is an overview, not a hydraulic design. Final equipment and operating limits are agreed in the quotation.
HI-DRONIC / SPECIALIST INTEGRATOR
One accountable partner from water inlet to cleaning head.
We specify, design and integrate the aircraft or robot, hydraulic plant, water quality, pressure, heat, dosing, hose management and vehicle layout around your real operating profile.
Site & method
Surfaces, access, water source and cleaning chemistry.
System engineering
Hydraulic architecture, component sizing and field layout.
Build & integration
Skid fabrication, van or trailer installation and controls.
Acceptance & support
Testing, handover, operator training and after-sales support.
Equipment / 02
Aerial, robotic and ground-operated cleaning, matched to the work.
Choose a compact aerial platform, a professional multi-mode drone, a tracked PV robot or a carbon pole system. HI-DRONIC then builds the mobile cleaning system around it.
AGILE AERIAL / LP + HP
Powered by HI-DRONIC
01MAX1
A compact captive platform for precise exterior treatment and cleaning where agility, fast deployment and controlled spray matter.
Best forRoofs • Façades • Solar • Localised treatment
- ✓Controlled aerial application
- ✓Camera and ground control
- ✓Surface-specific nozzle selection
- ✓Training and support by quotation
MULTI-MODE / PROFESSIONAL
Powered by HI-DRONIC
02MAX2
A professional cleaning platform for demanding façades, roofs and industrial assets, connected to a complete mobile hydraulic station.
Best forFaçades • Roofs • Industrial • Logistics
- ✓Ground control and camera
- ✓Compatible LP / HP modules
- ✓Configured hose and safety kit
- ✓For equipment purchase by quotation
PV ROBOT / DUAL BRUSH
Powered by HI-DRONIC
03SOLARBOT
A compact tracked robot for repeatable photovoltaic maintenance, controlled from the ground and paired with purified-water delivery.
Best forPV rooftops • Carports • Small & medium solar fields
- ✓Controlled brushing
- ✓Purified-water feed
- ✓Rooftop and ground-mounted PV
- ✓Site compatibility assessed
CARBON POLE / ROTARY BRUSH
Powered by HI-DRONIC
04HI-BRUSH
A professional ground-operated cleaning set combining a 14 m carbon telescopic pole with an electric rotary brush and adjustable multi-tool head.
Best forSolar panels • Cladding • Glazing • Hard-to-reach areas
- ✓14 m maximum extended length
- ✓2 m compact transport length
- ✓Adjustable speed, direction and head angle
- ✓15 m LP hose · 220 V or 24 V power box
Technical files / equipment
Understand the configuration before you buy.
Documented values and indicative system options are separated below. Open a file to review applications, operating limits and what the quotation must confirm.
01 / Powered by HI-DRONICMAX1Compact tether-compatible cleaning drone · Rev.06 baseline+
Compact professional platform for controlled application on façades, roofs and photovoltaic assets. It combines ground control, camera supervision, RTK-assisted positioning and a cleaning head selected for the surface.
- Airframe
- 1,140 mm diagonal · 870 mm without propellers · 400 mm high
- Mass
- 2.8 kg empty · 4.3 kg with batteries, without accessories
- MTOM / useful load
- 6.4 kg / up to 3.6 kg including batteries
- Maximum spray pressure
- 110 bar supported at the aircraft
- Speed / wind
- 5 m/s maximum ground speed · 5 m/s maximum wind
- Operating envelope
- 5–40 °C · below 1,500 m ASL
- Positioning
- GNSS + RTK; below 50 cm stated with correction, centimetric in best conditions
- Payload power
- 30 W maximum
- Control & safety
- HD ground supervision, telemetry and independent emergency-stop chain
- Typical missions
- Roofs, façades, PV modules and targeted exterior treatment
Documented in the MAX1 user manual Rev.06 and the V3 operating file. Battery, payload, nozzle, tether, class marking and flight authorisation must be confirmed for the delivered configuration and mission.
Request the complete configuration ↗02 / Powered by HI-DRONICMAX2Professional LP / HP cleaning drone · manual and equipment baseline+
Professional hose-fed cleaning platform supplied with configurable low- and high-pressure tools, HD supervision, dual RTK and a safety chain. The drone, nozzle, hose, pump and mobile station are validated as one system.
- Airframe
- 1,140 mm diagonal · 870 mm without propellers · 400 mm high
- Mass
- 2.8 kg empty · 4.3 kg with batteries, without accessories
- Maximum take-off mass
- 6.4 kg
- Aircraft pressure limit
- 120 bar with the validated hose and nozzle profile
- Speed / wind
- 5 m/s maximum ground speed · 5 m/s maximum wind
- Operating envelope
- 5–40 °C · below 1,500 m ASL
- Indicative endurance
- Approx. 50 min unloaded · 30 min LP · 20 min HP, configuration-dependent
- Positioning & control
- Dual RTK, HD video, adjustable camera and portable ground station
- HP cleaning kit
- Remote tilt, five fan nozzles, rotary nozzle and 25 m service hose
- LP cleaning kit
- Adjustable multi-jet boom, remote-triggered pump and configuration-dependent hose release
- Safety chain
- FTS / motor cut-off / parachute and emergency stops according to approved configuration
- Delivery
- System test, operator training, documentation and support by quotation
The mobile station may be designed up to 200 bar, but the documented aircraft limit is 120 bar. Endurance and reach are indicative; battery chemistry, exact kit, class marking and local operating approval are fixed in the final BOM and acceptance tests.
Request the complete configuration ↗03 / Powered by HI-DRONICSOLARBOTCompact tracked photovoltaic robot · documented product baseline+
Compact robot for repeatable photovoltaic maintenance on compatible rooftop and ground-mounted arrays. It combines adjustable dual brushes, tracked movement, telemetry and purified-water delivery.
- Mass
- 7 kg
- Dimensions
- 60 × 40 × 15 cm
- Indicative capacity
- Up to 800 m²/h in suitable conditions
- Indicative runtime
- Up to 1.5 h
- Travel speed
- Up to 5 km/h
- Indicative slope
- 30–35% depending on the installation
- Navigation
- GPS with dual RTK; stated precision up to 5 cm
- Brush assembly
- Front and rear brushes with adjustable pressure and rotation speed
- Surface adaptation
- Interchangeable tracks for compatible surfaces
- Safety
- Fall detection with automatic stop
- Supervision
- HD live video, telemetry, LED lighting and remote support connectivity
- Energy / water
- 16,000 mAh battery platform · purified-water feed
Output, slope, traction, brush contact and water settings depend on module construction, anchors, layout, weather and a site test. Module-maker instructions prevail and no universal production rate is guaranteed.
Request the complete configuration ↗04 / Powered by HI-DRONICHI-BRUSH14 m carbon telescopic pole · electric rotary brush+
Ground-operated professional system for photovoltaic modules, cladding, glazing and other compatible smooth surfaces. The carbon pole, electric brush, adjustable multi-tool head and low-pressure water feed form one portable package.
- Maximum extended length
- 14 m
- Closed transport length
- 2 m
- Pole construction
- Lightweight high-grade carbon fibre
- Cleaning head
- Electric rotary brush for smooth compatible surfaces
- Brush control
- Adjustable rotation speed and direction
- Head positioning
- Fully adjustable MULTI-TOOLS support with intuitive rotary knob
- Water feed
- 15 m low-pressure spray hose
- Power options
- 220 V or 24 V power box, battery not included
- Typical applications
- Solar panels, façades, cladding, glazing and high-access work
- Supply
- HI-DRONIC partner offer with Meldrone product support
Specifications and official product image are reproduced with partner authorisation from Meldrone. Pole and tool compatibility, site access, electrical supply, panel-maker instructions and safe working method must be confirmed before ordering and use.
Request the complete configuration ↗
05 / Powered by HI-DRONICMobile pump & water stationSkid · van · enclosed trailer · configured project+
The mobile architecture combines a configurable water reserve, prefiltration and optional RO + DI, separate pressure circuits, suitable hot-water equipment, hose management and ground-tool outputs.
- Water reserve
- Up to 1,000 L when configured and vehicle payload allows
- Treatment
- Prefiltration, RO + DI as required
- Pressure
- LP / HP circuits sized per tool; station design reserve up to 200 bar where approved
- Heated water
- Up to 90 °C on compatible circuits only
- Formats
- Removable skid, van or enclosed trailer
- Integration
- Pumps, reels, controls, power, safety and commissioning per quotation
OEM RFQ targets (e.g. flow, dosing and hose length) are engineering requests, not verified specifications of every delivered station. Confirm pump curves, duty cycle, payload, chemistry and acceptance tests before purchase.
Request the complete configuration ↗The manufacturer manual, approved equipment configuration, on-site test and local requirements always take precedence.
Every solution is configured for the site, surface, cleaning method, applicable rules and required support. Final scope, configuration and availability are confirmed in the quotation. Figures are technical baselines from the supplied product documentation. Final operating limits are confirmed for each approved configuration, site and local regulation.
The hydraulic core
One station. A modular cleaning toolbox.
The mobile plant supplies each cleaning platform with the right water quality, flow, pressure, temperature and chemistry—without rebuilding the rig between jobs.
010203RO + DI purified-water rinsing
Controlled dosing of suitable professional products
High-pressure cleaning for robust surfaces
Heated water for grease and heavy soil
Purified-water feed for robotic and pole tools
01Optional 1,000 L water reserve
02Filtration, RO + DI where needed
03Configurable low- and high-pressure circuits
04Hot water up to 90°C on compatible circuits
05Hose reels and serviceable layout
06Selected chemistry, controls & onboard power
Integration drawing / mobile station
A serviceable architecture, organised by function.
The supplied layout illustrates how water storage, treatment, pressure, heat and hose management can be integrated into a removable mobile system. The final installation is redrawn around the vehicle payload and approved bill of materials.
- ✓Up to 1,000 L configurable reserve
- ✓Prefiltration and RO + DI treatment
- ✓Separated LP / HP circuits and hot-water branch
- ✓Protected reels, controls and chemical containment
Station capability can reach 200 bar; aircraft pressure, flow, temperature and component selection remain governed by the approved platform configuration.
Mobile rigs & custom builds
Designed around the vehicle, payload and workflow.
From a removable skid to an enclosed trailer, every layout is engineered for service access, safe transport and fast deployment.
01Removable skid
A compact, serviceable module for suitable pickups, flatbeds or a dedicated ground base.
02Commercial van
A protected internal layout with organised reels, service access, storage and a dedicated equipment zone.
03Enclosed trailer
A self-contained professional station with weather protection, multi-side access and room for a complete 1,000 L architecture.
04Custom platform
Purpose-built hydraulic and tool packages for specialist vehicles, ground tools and mixed aerial-robotic workflows.
HI-DRONIC / DESIGN + BUILD + INTEGRATION
Integration can include mechanical layout, electrical systems, fluid routing, reels, accessories, safety labelling, factory acceptance testing and commissioning.
Build your starting configuration
Tell us how you want to work.
We verify site conditions, payload, pressure, water quality and local aviation requirements before confirming a technical and commercial offer.
